Dip Horn V3 | MRR Combatible – Rack-Mounted Dip Station

Original price €152.51 - Original price €152.51
Original price €0.00
€152.51
€126.04 Excl. Tax Final price varies by tax rate.
€126.04 - €126.04 Final price varies by tax rate.
Current price €126.04 Excl. Tax Final price varies by tax rate.
Tax included
SKU: DIPHORN-MRR-V3

Pairs well with:

The MRR Dip Horn V3 turns your rack into a full dip station in no time. One attachment, two upright sizes: thanks to its threaded locking pin, the Dip Horn fits both our Riot MRR 75 mm and Original MRR 60 mm uprights – so you can use it across your whole MRR setup, whether that's a power rack, a rig or a functional trainer. Hang it at exactly the height that suits your body, lock it in place and get straight into bodyweight dips, weighted dips, L-sits and leg raises.

Universal fit for MRR 60 and MRR 75 uprights. The Dip Horn V3 mounts with two 16 mm pins spaced 150 mm apart (centre to centre). The short lower pin hooks into the upright and takes the load as a support pin. The long upper pin goes all the way through the upright and is secured from the back with a threaded hand knob. Because you tighten the knob until it sits against the upright, the same Dip Horn adapts to the different depth of 60 mm and 75 mm uprights – no adapters, no extra parts. Both pins are designed for the 17 mm holes of our Riot MRR uprights, and both holes must always be used.

Slight V-shape for your ideal grip width. The two Ø45 mm handles are angled into a subtle V (20°). That means you can change your grip width simply by moving your hands along the handles: narrower close to the rack, wider towards the ends – from approx. 44 cm to 56 cm centre to centre. Go narrow to bias your triceps or wider to put more emphasis on your chest. The 45 mm diameter fills your hand and feels secure, even during heavy weighted sets.

Built for heavy weighted dips. Made from 5 mm steel with a black powder-coated finish, the Dip Horn V3 is rated for up to 200 kg per side and 400 kg in total. That leaves plenty of headroom for weighted dips with a dip belt, chains or a weight vest – and makes it a reliable choice for home gyms as well as busy training facilities.

Height-adjustable on every hole. You can mount the Dip Horn at any hole height on your upright. Set it so you can step in comfortably, keep your feet clear of the floor at the bottom of each rep and train with full range of motion – whatever your height.

Quick assembly. The Dip Horn V3 arrives in parts: you bolt the two handles onto the main frame before first use. All screws are included.

Rock-solid, no wobble. The threaded hand knob doesn’t just hold the Dip Horn in place – it pulls it tight against your upright. Once you’ve tightened it by hand, the Dip Horn sits firmly on your rack with no play and no wobble. Even during heavy weighted dips, the handles stay stable, so you can focus fully on your reps.

Safety note: tighten by hand only. Turn the threaded knob firmly by hand until the Dip Horn sits securely – no tools, and please don't overtighten. Hand-tight is all it takes for a stable hold. Overtightening can damage the coating of your uprights, and it makes it hard for the next person training on the rack to loosen the knob again. Before every session, check that both pins are fully inserted and the knob is tight.

Key Highlights

  • Fits both Original MRR 60 mm and Riot MRR 75 mm uprights – one attachment for your whole MRR system
  • Double-pin mounting: short lower support pin + long upper pin with threaded hand knob
  • 16 mm pins, spaced approx. 150 mm apart, for 17 mm upright holes
  • Slight V-shape (20°) – variable grip width of approx. 44–56 cm
  • Ø45 mm handles for a full, secure grip
  • 5 mm steel, black powder coat
  • Max load: 200 kg per side, 400 kg total – ideal for weighted dips
  • Mounts at any hole height on your upright
  • Simple assembly – screws and tools included
  • Tighten by hand only – protects your rack's coating

Specifications

Specification MRR Dip Horn V3
Compatibility Original MRR 60 and Riot MRR 75 uprights
Mounting 2 pins (lower support pin + upper pin with threaded hand knob)
Pin diameter 16 mm (for 17 mm holes)
Pin spacing approx. 150 mm (centre to centre)
Dimensions (L × W × H) 710.5 × 607.5 × 200 mm
Handle length (from frame) approx. 490 mm
Handle diameter 45 mm
Grip width approx. 44–56 cm (centre to centre, V-shape 20°)
Material Steel, 5 mm
Finish Black powder coat
Max load 200 kg per side / 400 kg total
Net weight 9.3 kg
Assembly Handles bolted to main frame, screws included

Exercises

  • Bodyweight dips – the classic for chest, triceps and front delts
  • Weighted dips – with a dip belt, weight vest or chains for progressive overload
  • Chest dips – wider grip, slight forward lean
  • Triceps dips – narrower grip, upright torso
  • Dip holds / support holds – static strength and shoulder stability
  • Knee raises & leg raises – core training in the support position
  • L-sits – advanced core and hip flexor strength

FAQ

Which racks does the Dip Horn V3 fit?

It fits all Original MRR 60 mm and Riot MRR 75 mm uprights. It mounts with two 16 mm pins spaced approx. 150 mm apart, designed for our 17 mm upright holes. Both holes must be used.

Does the Dip Horn wobble on the rack?

No. The threaded hand knob pulls the Dip Horn tight against your upright and removes any play. Once it’s hand-tight, the Dip Horn sits firmly on your rack and stays stable, even during heavy weighted dips.

How does the Dip Horn work on two different upright sizes?

The upper pin passes through the upright and is secured from the back with a threaded hand knob. You simply tighten the knob until it sits against the upright – this adapts the Dip Horn to the depth of either a 60 mm or a 75 mm upright.

How tight should I turn the knob?

Hand-tight only, no tools. That's enough for a secure hold. Overtightening can damage your rack's coating and makes it difficult for others to loosen the knob again.

Can I do weighted dips with it?

Yes. The Dip Horn V3 is rated for up to 200 kg per side and 400 kg in total – plenty of capacity for weighted dips with a dip belt, chains or a weight vest.

Can I change the grip width?

Yes. The handles form a slight V-shape, so your grip width changes depending on where you place your hands – from approx. 44 cm near the rack to approx. 56 cm at the ends (centre to centre).

Does it need assembly?

Yes, but it's quick: you bolt the two handles onto the main frame. All screws are included.

Customer Reviews