⭐ DAL 2009, UN NOME DI FIDUCIA

💪 PROGETTATO DA ATLETE E ATLETI

🔥 AMPIA SCELTA DI DESIGN UNICI

🚚 SPEDITO DA BERLINO

Stazione per dips per Sezione Scatolata da 60MM

Prezzo originale €149.99 - Prezzo originale €149.99
Prezzo originale €0.00
€149.99
€126.04 Escluse le tasse
€126.04 - €126.04
Prezzo attuale €126.04 Escluse le tasse
Imposte incluse
SKU: DIPHORN-60MM
Il prezzo finale dipende dall'aliquota fiscale del paese di spedizione.

Si prega di notare: Questo articolo NON è compatibile con la gamma MRR a causa di un diverso diametro del foro per il perno.

Attacco Corno per Dip per Sezione Scatolata da 60 mm.

Questa Stazione per dips è compatibile con il nostro Rack a gabbia Nero Opaco, Gabbia da Garage e Stazione Multiuso Riot.

Maniglie posizionate ad angolo per offrire diverse larghezze, così puoi trovare la posizione più comoda per i dips.

Quando si utilizza con un Rack a gabbia, è essenziale appesantire la gabbia con pesi o fissarla al suolo per ridurre il rischio di ribaltamento.

Dimensioni approssimative:

Lunghezza totale - 87 cm
Larghezza totale - 67 cm
Altezza totale - 30 cm

Distanza tra le maniglie:
42 cm nella posizione più stretta
60 cm nella posizione più ampia

Maniglie con diametro di 4,5 cm
Lunghezza maniglia 56 cm
Diametro perno di 2,5 cm per il fissaggio al Rack

Peso: 11 kg


Progettato per adattarsi ai nostri Rack/Gabbie con sezione scatolata da 60 mm x 60 mm.
Portata massima: 200 kg

Customer Reviews

Overall rating: 4.4 / 5 from 9 reviews.

Customer photo review of Dip Horns For 60MM Box Section

Great Addition to Rack Bought this for my garage half rack. Make sure you can bolt it down or have enough plates to keep it stable. I drilled a new hole on the side of the rack to fit this to. Meaning it faces straight off the front of the rack. Without this you can't tighten the turn keys as they'd only go into all the precut holes. In pic 3 you can see how they now tighten to the frame. As opposed to pic 1 where they just go onto fresh air.

Dip Horns For 60MM Box Section

Customer photo review of Dip Horns For 60MM Box Section

the dip horns are sturdy, but when I go to mount them on the strength shop's rack, I notice that only one of the screws works while the other doesn't! the result is that the dip horns are not stable and wobble! I think there is a manufacturing error in the hole that seats the screw, because in correspondence with the hole behind it there is a void so the waist doesn't grip.

Dip Horns For 60MM Box Section

Die Siphorns passen super für Racks mit 2,5 mm Lochdurchmesser, und 60mm stahl. Die Schweißnähte sind nicht die allerbeste Qualität, das ist denke ich aber nur kosmetisch und bezüglich der Belastung zu vernachlässigen. Ansonsten tun die Hörner was sie sollen!

Dip Horns For 60MM Box Section

Solide Dip Horns. Leider wackelt das ganze Rack wenn es nicht am Boden verschraubt ist. Ebenso ist nur 1 von 2 Schrauben zum fixieren wirklich sinnvoll nutzbar. Ansonsten Solide und massiv, daher 4 Sterne.

Dip Horns For 60MM Box Section

Solid Great bit of kit. Bomb proof as is most strength shop stuff. My only criticism is I wish the screws had been replaced with a hitch pin like the 75mm model, especially as they cost the same. Other than that small criticism, you can't find horns at this quality and price elsewhere

Dip Horns For 60MM Box Section

I got them for my half rack. I gave 5 stars because the dip Horns themselbea are great. The space before the separation allows you to bend forward without hitting your head. They are easy to install and remove. But beware: they don't face the front or back. They face to the side, which means in some half racks they would shake too much. Which is the case with mine. But that's not the dip horn's fault so I'll give 5 stars anyway. Tbh I love strengthshop, they have good products and good prices and great customer service that answers quickly and gets things done. They saved my ass in the pandemic.

Dip Horns For 60MM Box Section